Home / Machines / Rewinding and slitting machines / EASYline US-320 and US-420

Rewinding and slitting machineEASYline US-320 and US-420

The EASYline US-320/ US-420 rewinding and slitting machine enables the production of narrow cut rolls from any roll material such as paper, films, adhesive labels and laminates up to approx. 600 g/m². It converts and controls web-shaped materials up to a width of 320mm/ 420mm.

The robust machine with its solid steel frame is easy to operate after a short training period. The speed can be controlled electronically. The machine stops automatically once a preset number of labels or running meters has been reached.

The simple, efficient design of the system enables extremely short set-up and changeover times.

Material to be processed: Adhesive labels, paper, film, laminates up to 600 gr/m².

 Data sheet - german     Datasheet - english

Request now  

Umroll- und Schneidmaschine EASYline US-320 und US-420
 
 

Equipment of the EASYline US-320

Steel frame

  • Welded steel frame

  • Side panels made of painted steel plates

  • Steel base plate

  • Sides and cover plates made of sheet steel

  • Electronics integrated in the machine housing

  • Connection 240 Volt

Unwinding with pneumatic expansion shaft

  • Magnetic particle brake

  • Right/left unwinding possible

  • Web tension manually adjustable

  • Automatic switch-off at the end of the roll

  • Pneumatic expansion shaft 76 mm

  • Diameter max. Ø 500 mm

  • Max. castor weight 80 kg

  • Material width from 50 mm to 320 mm/ 420 mm

Splice table

  • Sheet steel splice table

  • Two mechanical material clamps

  • Blade guide for cross or diagonal cut

Web center control (web edge control)

  • By means of 2 light scanners

Counter

  • Possibility to switch from label counter to linear meter counter

  • Machine stops when the preselected number of pieces / length is reached

Preferred unit

  • Steel roller

  • Rubberized pressure roller

  • Pneumatic contact pressure of the pressure roller

  • Driven by electric motor

  • Web speed up to 120m/min depending on product

Suction device

  • Axial fan for extracting an edge strip

Longitudinal cutter

  • Silhouette system

  • Eight upper knives

  • Eight bottom knives

  • Minimum cutting width 18mm

  • (different knife systems on request)

Rewinding

  • Two pneumatic expansion shafts for 3 inch cores

  • Web tension separately adjustable via magnetic powder clutch

  • Roller diameter max. Ø 480 mm

  • Permissible axle weight 80kg

Operating and control unit

  • Main switch

  • Control ON

  • Machine START / STOP

  • Emergency stop

  • Variable speed through rotary potentiometer

  • Automatic stop of the machine when the preselected number of meters / labels is reached

  • Electronic components integrated in the machine housing

  • Track run from left to right

Technical data

  • Electrical voltage: 240 volts

  • Electrical power: 1.8 / 2.2 KW

  • Current: 10 amps

  • Frequency: 50 Hz

  • Length x width x height approx.: 1,100 mm x 900/1,000 mm x 1,300 mm

  • Weight approx.: 530/ 600 kg

Options

  • Expansion shafts from 19 mm to 6 inchdiameter

  • Friction shafts
  • Inner/outer winding switchable
  • Crush cutters
  • Blade cutter
  • Back scoring unit
  • Narrow cut from 3mm
  • Label counter for transparent materials
  • Equipment for processing open adhesive