Rotary Die-Cutting-Machine
EASYline R-320 und EASYline R-420

The Rotary and Die -Cutting -Mache R-320 and Easyline R-420 enable the production of die Cut parts and labels as well as narrow cut rolls from any roll material such as paper, folils adhesive labels and laminates up to 600gr./m². They prepare and control web shaped materials up to a width of 320 mm / 420 mm.

The robust machines, consisting of a solid steel frame, can be easily operated after only a short training period. The speed can be controlled electronically. After reaching a preset number of labels or running meters, the machine stops automatically. 

The simple, efficient design of the system enables extremely short set up and changeover times.

Material to be processen: Adhesive labels, paper, foil, laminates up to  600gr./m².
Please provide samples before placing an Order.

 Data sheet - English   

Order now  EASYline R-320

Order now  EASYline R-420
Rotationsstanzmaschine EASYline R-320 / R-420
 
 

Equipment of the EASYline R-320 / R-420

Steel plate construction 

  • Welded steel frame 

  • Covered with painted steel plates 

  • Front and bottom plate made of steel 

  • Sides and covers made of sheet steel 

  • Elektronics integrated in the machine housing 

  • Supply 400 Volts

Unwinder with pneumatic air shaft 

  • Magnetic powder brake 

  • Right/left unwindling possible 

  • Tension can be adjusted manually 

  • Automatic switch off at the end of roll 

  • Pneumatic air shaft 76 mm

  • Roll diameter max. Ø 600 mm

  • Coil-Weight max. 100 kg / 140 kg

  • Material width 100 mm to 320 mm / 420 mm

Splicetable 

  • Splice table from sheet steel 

  • Two clamping jaws 

  • Knife guid 

Web guiding system

  • By photoelectric sensor 

Rotary the cutting station 

  • Cutting length from 178 mm to 470 mm

  • 1/8 inch teeth

  • Anvil Cylinder

  • Pressure bridge with ball-bearings and felt strips

  • Adjustable waste rewinder with magnetic powder clutch and air shaft without cutting tools 

  •  Adapters for existing tools available on request

Counter

  • Changeable from label counter to counter meter

Drive unit 

  • Steel roller 

  • Rubberized pressure Roller 

  • Adjustable pressure of the pressure roller 

  • Driven by electric motors 

  • Web speed up to 100m/min depending on the product

Suction 

  • Axial fan for suction of wate strip

Slitter

  • Scissor cutting system with rotary blades 

  • Eight pc. of upper blade

  • Eight pc. anvil blade rings 

  • Minimum cutting width 18mm / 10 mm as option

2 piece rewinding shafts

  • Pneumatic air shaft for 3 inch cores (1 inch and other sizes as option)

  • Tension adjustable by magnetich  powder clutch

  • Inside/outside winding possible 

  • Roll diameter max. 480 mm

  • mas. axle weight 80 kg / 120 kg

Operating and control unit

  • Main switch

  • Control "ON" button

  • START / STOP button

  • Emergency Stop button

  • Variable speed by potentiometer

  • Meter and label counter switchable 

  • Automativ machine stop when reaching the pre-selected number of meters/labels 

  • Elektronic components integrated in the machine housing

  • Web direction from left to right 

Technical Data:

  • Voltage: 400 Volt

  • Electrical power : 3 KW

  • Current: 5 Ampere

  • Frequency: 50 Hz

  • Length x Width x Height ca.: 2.200 mm x 1.100 mm / 1.220 mm x 1.700 mm

  • about ca.: 1.380 kg / 1550 kg