Laminating machine EASYline LM-1300 and LM-1800
The EASYline LM-1300 / EASYline LM-1800 roll laminator is designed for laminating and cutting web-shaped materials up to a width of 1,300 mm / 1,800 mm. The laminator is designed for industrial use and can accommodate rolls up to 600 kg with a maximum diameter of 1,000 mm. The appropriate web tension is adjusted via magnetic powder brakes. Together with the rubberised contact roller with variable contact pressure, an optimal laminating result is achieved. The laminator is suitable for medium to large laminating jobs.
The robust laminating machine, which consists of a solid steel frame, is easy to operate after only a short training period. The laminating machine stops automatically after a set metre length and at the end of the roll. Depending on the material, a speed of up to 110m/min can be achieved.
Eight upper and lower knives each are supplied, allowing the laminated material to be cut into rolls with a minimum width of 20 mm (roll shear cut).
The simple, efficient design of the laminating unit enables extremely short set-up and changeover times, while the robust mechanical construction ensures a long service life. The electronic components are integrated in the housing, so that only about 6 m² and a 240V connection are required.
.

Equipment of the EASYline LM-1300 and EASYline LM-1800
Steel frame
-
Side plates made of lacquered steel plates
-
Steel base plate
-
Sheet steel sides and cover plates
-
Electronics integrated in the machine housing
-
Connection 240 Volt
Unwind 1 with pneumatic expansion shaft
-
Right/left unwinding possible
-
Web tension adjustable via magnetic powder coupling
-
Pneumatic expansion shaft 76 mm
-
Diameter max. Ø 1,000 mm
-
Roll weight max. 600 kg
-
Material width from 250 mm to 1,000 mm
-
Stop sensor (At end of roll)
Unwind 2 with pneumatic expansion shaft
-
Right/left unwinding possible
-
Web tension adjustable via magnetic powder coupling
-
Pneumatic expansion shaft 76 mm
-
Diameter max. Ø 600 mm/ 800 mm
-
Roll weight max. 600 kg
-
Material width from 250 mm to 1,300 / 1,800 mm
-
Stop sensor (At end of roll)
Preferential unit / laminating unit
-
Steel roller
-
Rubberised pressure roller, pmeumatically adjustable
-
Adjustable contact pressure of the pressure roller
-
Electric motor driven
-
Web speed up to 110m/min depending on product
Suction device
-
Axial blower for suction of an edge strip
Counter
-
Metre counter
-
Machine stops when the preselected length is reached
Rewind
-
Pneumatic expansion shaft for 3 inch sleeves
-
Web tension adjustable via magnetic powder coupling
-
Max. roller diameter Ø 500 mm
-
Permissible axle weight 500 kg
Operating and control unit
-
Main switch
-
Control ON / OFF
-
Machine START / STOP
-
Emergency stop
-
Variable speed through rotary potentiometer
-
Automatic stop of the machine when the preselected number of metres is reached
-
Electronic components integrated in the machine housing
-
Safety system with light grid around the machine
Options - Longitudinal cutter
-
Silhouette system
-
Eight top knives with clamp
-
Eight pieces lower knife with clamp
-
Minimum cutting width 20 mm
Technical data
-
Electrical voltage: 240 volts
-
Electrical power: 6 KW
-
Current: 10 amps
-
Frequenz: 50 Hz
-
Length x width x height approx.: 2,500 mm x 2,200/ 2,700 mm x 1,400 mm
-
Weight approx.: approx. 1,200 kg / 1,400 kg